Category Archives: Downloadable Spec Sheets

The LP-4J-SP4559 lever bypass meter adapater is designed to be installed in a lever bypass meter base to allow installation of a Servisavor® Temporary Restoration Device. The LP-4J-SP4559 can be installed in 200 A and 320 A meter bases, including those with a restricted opening in position #3. The adapter has an opening allow installation…

The Servisavor® is a highly mobile unit designed to temporarily restore power to customers who have a single faulted conductor. By connecting the Servisavor® between the customers’ meter socket and his meter, power can be restored without immediately locating and repairing the cable fault or running temporary above ground conductors. Downloadable Spec Sheet

The VON B-.35 and B-.45 can be used for most industrial and substation testing including insulation resistance, dielectric absorption, DC Hipot, and polarization index tests. Units can be operated off of 120V AC or 12V DC with the optional inverter and a light, easily portable design makes no job site too remote. Downloadable Spec Sheet

The VON Corporation manufactures a complete line of Aerial Lift Test Sets. The model C-1 is the most popular unit for distribution class trucks (Category C and Category A&B to 69kV). Its 100kV output allows for testing of all Category C trucks and the largest bucket liners. The use of DC allows testing of even…

The GM022 is The VON Corporation’s most economical manual glove and sleeve tester. Units allow testing of gloves and sleeves. All machine adjustments are controlled manually, allowing maximum fl exibility for low-volume applications. A GM024 and GM026 model are available with 4 and 6 glove capacities respectively. The GM022 will manually test one or two…

The Servisavor® is a highly mobile unit designed to temporarily restore power to customers who have a single faulted conductor. By connecting the Servisavor® between the customers’ meter socket and his meter, power can be restored without immediately locating and repairing the cable fault or running temporary above ground conductors. Downloadable Spec Sheet

The VON SAIDISAVER is a compact sectionalizer. Its simple 2-step operation makes this URD loop sectionalizer one of the easiest to use in the industry. Along with its extreme durability, this SAIDISAVER automatically marks end of cable, transformer locations, fault locations and gives accurate distance on a backlit LCD display that’s easily visible in sunlight….

The L, M and N Series is The VON Corporation’s fully automated, microprocessor-controlled system which tests gloves, sleeves, and line jumpers. All standard rubber goods can be tested, including class IV. All adjustments are controlled via a menu-operated microprocessor control system. With a single selection, the test voltage, current limit, depth, water fi ll level,…

The TGM022 is The VON Corporation’s most economical, semi-automatic, glove and sleeve tester. Units allow testing of gloves and sleeves. All standard rubber goods can be tested, including class IV. Test voltage and test time are set by selecting the type of glove to be tested through a menu based system. Glove and sleeves are…

The TSM Series is The VON Corporation’s fully automated blanket test solution. Units allow testing of all standard rubber blankets, including class IV. Tests are timed and an audible alarm sounds failures or test complete, with bright flashing colored lights signaling which position failed or test complete. Four and eight position models are available. Downloadable…