|
|
|
|
|
|
|
|
|
|
| |||
|
|
|
| |||
|
|
|
| |||
|
|
|
| |||
Using the SERVISAVOR on lever-bypass meter-sockets
Many utilities are having an increasing number of 320A services on their system, which normally include a lever-bypass meter-socket. Some 200A meter bases are also now coming with a lever-bypass meter-socket. This creates a problem when trying to install a Servisavor. To insert the adapter head, the lever-bypass must be open requiring the cover to be off. Without disassembling the Servisavor adapter head, the cover cannot be replaced with the Servisavor attached.
There is a solution to this problem, an adapter which allows the Servisavor to be installed in a meter bypass lever socket. Two adapters are available, LP-4J-SP4513 and LP-4J-SP4559
Some class 320 meter-sockets have a restricted opening for the meter blade in the upper right jaw position (ANSI position #3). The LP-4J-SP4559 is equipped with a narrow blade in position #3 and is useable in sockets with and without the restricted jaw opening.
The LP-4J-SP4513 will only work on those sockets, which are not equipped with the restricted jaw opening.
The two adapters are identical otherwise.
To install a Servisavor in a class 320 meter-socket, or some of the new 200-amp lever-bypass meter-sockets, using the LP-4J-SP4513 or LP-4J-SP4559;
To give you the best possible price and availability, these adapters are available directly from the manufacturer, Brooks Ekstrom. You can contact them directly at:
Brooks Ekstrom
23847 Industrial Park Dr
Farmington Hills, MI 48335-2860
(888)687-3008
If you have any questions, please do not hesitate to contact the VON Corporation.
|
|
|
 |
|
|
The VON Corporation, P.O. Box 110096, 1038 Lomb Avenue SW
Birmingham, AL 35211 (205)788-2437 |
|