-
- The
VON B-.35 and B-.45 are designed to be the most reliable 35
and 45kV testers available. They can be used to test cable,
vacuum bottles, bushings, or anything that can be tested with
DC voltage. Units can be operated off of 120V AC or 12V DC with
the optional inverter and a light, easily portable design makes
no job site too remote.
WEIGHT - 80 pounds (36.4 kg)
- WIDTH
- 15.125" (38.5 cm)
- HEIGHT
- 18" (45.7 cm)
- LENGTH
- 23" (58.4 cm) over handles
- INPUT
- 110-125 volts 50-400 hz A.C. or 12 volts D.C. (optional)
- TESTING
- 6 ma to 35kv, 1% ripple
- TESTING
- 5 ma to 45kV, 10mA intermittent duty
- CASE
- Aluminum with grey finish
This
two man portable unit contains:
- High
reliability VON voltage doubler circuit with silicon rectifiers.
- The
fully protected output meter in the high voltage lead indicates
true leakage readings. Ranges 0-10 mic, 0-30 mic, 0-100
mic, 0-300 mic, 0-1 ma, 0-3 ma,0-10 ma.
- Megohm
scales on the output meter allow direct resistance reading
from 100,000 ohms to 300,000 megohms.
- A
0-5 amp A.C. ammeter in input of the 110 volt to 13kv air
insulated epoxy impregnated high voltage transformer.
- A
rugged taut band high torque kilovoltmeter wit ranges of
0-10kv, 0-35kv or 0-15kV, 0-45kV.
- A
variable autotransformer for continuous voltage adjusment.
- Power
on and off-discharge switch discharges cable through a 2.5
megohm resistor.
- Two
ground relay systems require that the case ground, the 120
volt source ground, and the test lead ground be within 100
ohms or each other in order to operate the unit.
- Varistors
are provided between the 120 volt input lines and the case
to provide surge protection to the equipment.
- Shielded
test lead, 35 feet (10.6M) long. Other lengths are available
such as 60 feet and 75 feet.
- Optional
built in inverter with 15 ft.(4.6m) battery leads permits
operation from a 12 volt truck battery
For
Printer formatted specifications in Adobe Acrobat format
click
here. Approx. 220kB
|
|
